Connex E-Bike Bicycle Chain – 1E8 For Hub Gearshift

The further reinforced link plates transmit the torque of the electric drives more reliably and thanks to the different number of links an adjustment to any length is possible.

The Connex 1E8 e-bike chain is only suitable for use on bicycles with hub gears. With 10.5 mm pin length, is significantly wider than the narrower sister model Connex 7E8.

Using the „wider“ Connex 1E8 chain on a „narrow“ drive can lead to increased vibration of the chain on the other components. In this case, the  narrower Connex 7E8 chain is recommended.

Normal width (7E8) refers to a hub gear chain that is used on Shimano Nexus sprockets, for example (1/2″ x 3/32″). If your drive has a wider chainring, you must use the 1E8 chain (1/2″ x 1/8″).

Dimensions:1/2″ x 1/8″ (12.7 mm pin to pin x 3.175 mm inner link width)
Pin length: 10.5 mm

Note: The chain can also be supplied in custom lengths upon request. Please contact us for this purpose. 

Note: if you have any questions regarding compatibilty or availability, do not hesitate to contact our customer service.