Giant RideControl Ergo 3 SG Control Unit

The Giant RideControl Ergo 3 SG control unit focuses on minimalism and a compact design. The handlebar control unit is only compatible with the RideControl GO control unit. Using three buttons, you can quickly and intuitively control the motor assistance of your e-bike. You can also use two RideControl Ergo 3 at the same time. With the additional control unit you can then control your lighting system and, if necessary, the information display on the RideDash EVO display.

Features of the Giant RideControl Ergo 3 control unit

• Small & compact handlebar control unit
• Only compatible with RideControl GO & Smart Gateway (SG)
• 3 button operation
• Can be combined with second Ergo 3
• Can also be used to control displays

Functions and operation of the Giant RideControl Ergo 3

Even with just one minimalist Ergo 3 control unit, you have full control over your e-bike assistance. With the thumb switches up and down, you switch between the different support levels. You activate the push assist via the middle button and pressing the „up button“ for 3 seconds. You can enable Auto-Mode or Smart Assist when using one Ergo 3 by pressing and holding the „up“ or „down“ button. If you are using two Giant Ergo 3 control units, you can also activate Smart Assist by pressing the middle button on the additional control unit for 3 seconds. You can also use the second handlebar remote control to control your lighting system. Use the „Up“ button to activate or deactivate your lights. When the lights are on, the RideDash EVO display is also dimmed. If you are riding an S-pedelec, you cannot switch off the lights. In this case, the button is used to switch between low and high beam, if available. The operation of displays works on a second RideControle Ergo 3 via the „down button“.

Possible combinations of the Ergo 3 control unit

1. RideControl GO + 1x RideControl ERGO 3
2. RideControl GO + 2x RideControl ERGO 3
3. RideControl GO + 1x RideControl ERGO 3 + RideDash EVO
4. RideControl GO + 2x RideControl ERGO 3 + RideDash EVO
5. RideControl GO + 1x RideControl ERGO 3 + ANT+ Display
6. RideControl GO + 2x RideControl ERGO 3 + ANT+ Display

Note: Not all Giant e-bikes from model year 2021 are compatible with Smart Gateway (SG) technology. Please check compatibility before ordering.

If you have any questions regarding compatibilty or availability, do not hesitate to contact us.